
HCO Collapsible Game Feeder (225/450) Installation Instruction
Thanks for your purchase of HCO Collapsible Game Feeder.
Make sure you're wearing gloves to protect your hands when you
assemble the feeder as the parts contained in the package may
have rough surfaces and sharp edges.
Package contents:
Recommended tools: 11mm socket, ratchet or nut driver and
pliers.
1 Attach Item No. 1 front panel (with ¼” hole in the center top) to
Item No. 2 side panel (w/o hole) and corner brace No. 3 with
supplied bolts. Use 0.625” bolt (No.15) for top holes. (Note: on
450LB model you will secure the stability brace from any top
corner to the opposite diagonal corner. 2pcs of No.15 bolts will
be needed. Please install the stability brace after the Step 10.)
Use 2” bolts (No.14) for the two lower holes in each side. In
this process, the 1” square metal tube (leg base) needs to be
installed at each corner. This is the tube that has a slight angle
to it. Use a large flat washer (provided) with the longer bolt.
Comments to this Manuals