Hco NT User Manual download pdf

Uway NightTrakker NT50/NT50B

Quick Start

GETTING STARTED:

** TURN REMOTE ON BEFORE TURNING CAMERA ON. PLEASE

CHARGE THE REMOTE BEFORE USE.

INSTALL SD CARD: The camera supports SD card up to 16GB. The

camera does not have any internal memory. Insert SD card with

unmarked side facing front of camera. Ensure SD card slider is

NOT in locked position.

CONNECT POWER: This camera is designed for Alkaline or Nickel

Metal-Hydride (Ni-MH) C type batteries. Ni-MH batteries are

preferred. A 6V AC to DC power cord (sold separately) can also

be used with or without batteries connected. Insert 4 C batteries

while ensuring polarity (+ -) is correctly orientated. To remove

batteries, push finger through hole under battery compartment

to lift batteries. Solar panels DO NOT charge batteries located in

the camera.

CHECKING BATTERY LEVEL: Connect remote and camera. Turn

remote ON. Turn camera ON. See camera battery level in bottom

left corner and remote battery level in bottom right corner of

LCD display

**It is strongly recommended using NiMH rechargeable batteries

for best performance ON NT50B. Due to the nature of black flash

LEDs consuming more power, it is strongly recommended to set

the video length to a maximum of 30s for optimal performance

and higher video quality. Battery life can be extended using

smaller video segments.

TESTING AND WORKING MODES:

The camera has two modes: testing mode and working mode.

When the camera is turned ON without being connected to the

remote controller, it will go into the working mode automatically

using the latest settings. The red LED will blink for 10 seconds

before the camera is capable of being triggered by motion.

**If the camera beeps, it means either no SD card is inserted or

the SD card is not inserted properly or not compatible.

When the camera is turned ON with the remote controller

connected and also powered ON, (Note: if the remote controller

is not powered ON, the camera will not detect it) the camera will

go into the testing mode, allowing you to change the settings,

view the photos/videos, set up your camera, etc. If at any time,

the camera and remote are disconnected while the camera

power is ON, the camera will automatically switch into working

mode.

** Turn the remote OFF after each use. A red LED located on the

bottom beside the USB battery charge port indicates the remote

is ON.

** The remote enters sleep mode after 1 min of no activity. Push

any key to wake it when it connects to the camera.

MENU OPERATIONS AND SETTINGS:

LIVE PREVIEW

This option allows the user to view in real time what the camera

is capturing. Pictures/videos can also be taken using the “SHOT”

button while in this mode. Enter preview by highlight “Live

Preview” and push OK button or right arrow button.

In Live preview mode, push photo or video icon on remote to

enter photo or video mode preview. Push UP Arrow for Day Color

Mode. Push DOWN Arrow for Night IR Mode (picture will be

black and white; 28 LED will be ON continuously while in this

mode). Push SHOT button to capture picture or video. Push

MENU button to return to menu

PHOTO / VIDEO PLAYBACK

This feature allows you to view pictures and video stored on the

SD card. Users can ZOOM into pictures and PAN around for

greater detail. Video playback includes sound through an

earphone port on top of the remote; user can pause, stop,

rewind, and fast forward video. Enter Playback mode by highlight

“Photo / Video Playback” and push OK button or right arrow

button. Scroll through pictures and video using LEFT and RIGHT

ARROW buttons.

PLAY VIDEO: Video files have a “play symbol” on the bottom left

corner of the picture. Push OK button to play video. Push UP or

DOWN arrow to adjust volume. Push OK button to pause video.

Push RIGHT arrow to fast forward or LEFT arrow to rewind. Push

MENU to go back

ZOOM PICTURES: Push bottom “+” button to zoom in. Push

bottom “-“button to zoom out. Push ARROWS to PAN around on

picture. Push MENU to go back.

DELETING PICTURES / VIDEO: Push DEL button. Select ONE or ALL

pictures / videos. Push OK to delete. Push MENU button to

return to menu.

CAMERA MODE

This camera can be set to capture still pictures OR video.

Highlight “Camera Mode” and push OK or right arrow button.

Select VIDEO or PHOTO by using UP or DOWN arrow and Push OK

to SAVE.

VIDEO LENGTH (only displayed if VIDEO mode is selected above)

Video length can be set in 10 sec increments from (10s – 1min).

Highlight “VIDEO LENGTH” and push OK or right arrow button.

Select desired video length and push OK to SAVE.

PHOTO RESOLUTION (only displayed if PHOTO mode is selected

above)

Photo resolution can be set at 8MP, 5MP, 3MP, 1.3MP, 0.8MP,

0.3MP. Highlight “PHOTO RESOLUTION” and Push OK or right

arrow button. Select desired photo resolution and push OK to

SAVE.

PHOTO BURST (only displayed if PHOTO mode is selected above)

This feature allows the camera to take from 1-9 photos in rapid

succession following each trigger. Highlight “PHOTO BURST” and

push OK or right arrow button. Select desired number of photos

per trigger and push OK to SAVE setting.

1 2

Quick Start 1

Summary of Contents

Page 1 - Quick Start

Uway NightTrakker NT50/NT50B Quick Start GETTING STARTED: ** TURN REMOTE ON BEFORE TURNING CAMERA ON. PLEASE CHARGE THE REMOTE BEFORE USE. INSTALL SD

Page 2

VIDEO SOUND (only displayed if VIDEO mode is selected above) Video sound recording can be turned ON or OFF. Highlight “VIDEO SOUND” and push OK or rig

Comments to this Manuals

No comments

Hco NT User Manual

Browse online or download User Manual for Camcorders Hco NT. HCO NT User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Camcorders Hco NT